A single 6.5-inch in-ceiling speaker with a dual voice-coil woofer and twin ¾-inch tweeters, so one speaker can play both stereo channels — for bathrooms-adjacent passages, kitchens, balconies and small rooms where two speakers will not fit. Verified specifications, room and receiver matching, and installation guidance from LiveInSmart.
The JBL Stage 260CDT is a dual voice-coil stereo in-ceiling loudspeaker from the JBL Stage Architectural range with 90 dB sensitivity. Dolby Atmos height channels is its main role. How well it suits a room depends on room size, placement, amplifier matching and the overall system design. LiveInSmart supplies, installs and supports it across Andhra Pradesh and Telangana.
What Is the JBL Stage 260CDT?
A single 6.5-inch in-ceiling speaker with a dual voice-coil woofer and twin ¾-inch tweeters, so one speaker can play both stereo channels — for bathrooms-adjacent passages, kitchens, balconies and small rooms where two speakers will not fit. It belongs to the JBL Stage Architectural range and is supplied as a single unit.
Key Features and What They Mean
Only features published by JBL are listed, with what each means in a real room.
**Dual voice-coil 6.5-inch woofer** — Accepts left and right channels in one speaker, so small rooms still get the full stereo mix.
**Dual ¾-inch aluminium domes with acoustic lens** — One tweeter per channel.
**Zero-bezel metal grille, XL-2 mounting** — The grille sits flush with the wall or ceiling, and the XL-2 system clamps into board up to 2 in (50 mm) thick — suited to gypsum false ceilings and dry-wall partitions.
JBL Stage 260CDT Specifications
Values from JBL's manufacturer documentation, checked on 10 October 2026. Where JBL's own documents conflict or a figure isn't published, we leave it out instead of guessing. View the JBL source document.
Dual ¾-inch (20 mm) aluminium dome with acoustic lens
Recommended amplifier power
20–75 W RMS
Frequency response (−6 dB on-axis)
50 Hz – 25 kHz
Sensitivity (2.83 V @ 1 m)
90 dB
Nominal impedance
8 ohms
Crossover frequency
2.9 kHz
Grille diameter
233 mm
Cut-out diameter
203 mm
Mounting depth
106 mm
Weight
2.2 kg
Pre-construction bracket
CB6
What the Specifications Mean in Practice
How to read these numbers when planning your room.
**Sensitivity 90 dB** — each 3 dB higher sensitivity means roughly half the amplifier power for the same loudness. This is an efficient speaker that most AV receivers drive comfortably.
**Nominal impedance 8 ohms** — an 8-ohm load is easy for almost any receiver or stereo amplifier.
**Recommended amplifier power 20–75 W RMS** — this is a range, not a requirement to buy the largest amplifier. Room size and listening level decide what you need.
**Mounting depth 106 mm** — confirm the wall cavity or false-ceiling plenum is deeper than this, with clearance for cables and brackets.
No specification guarantees a listening result: room size, furnishings, placement and calibration change what you hear.
Best Use Cases
Applications the Stage 260CDT is designed for:
Dolby Atmos height channels
Surrounds in rooms without wall space
Whole-home background music
Who Should Consider It — and Who May Prefer Another Option
**Consider it if:** Homes where the speakers should disappear into a gypsum false ceiling or dry-wall — Atmos height layers, surrounds and whole-home music.
**You may prefer another configuration if:** Very shallow ceilings, concrete slabs without a false ceiling, or rooms where height effects need precise aiming may need different models.
System Matching: AV Receiver, Speakers and Subwoofer
Each Atmos height speaker needs its own amplified channel; background-music zones can use a stereo amplifier.
False-ceiling plenum depth checked against mounting depth
Pre-construction brackets during false-ceiling work
Positions set relative to seats, not light fixtures
Moisture exposure considered for kitchens and balconies
Why Buy the JBL Stage 260CDT Through LiveInSmart
LiveInSmart Technologies is an authorised JBL channel partner in Telangana and Andhra Pradesh, and a home-theatre and AV integrator with showrooms and demo rooms in Hyderabad (Ameerpet) and Vijayawada (Ashok Nagar). We help you choose JBL speakers for your room, match them with an AV receiver, then supply, install, calibrate and support the system — with 1000+ installations over the years and a 48-hour after-sales response.
Help choosing the right model and speaker roles for your room
Speaker and AV receiver matching
Supply and delivery coordination
Professional installation, configuration and testing
The team that installs your system supports it: 48-hour response, troubleshooting, recalibration after furniture or speaker changes, manufacturer warranty coordination and service escalation, and replacement or upgrade consultation.
JBL Stage 260CDT in Andhra Pradesh & Telangana
As an authorised JBL channel partner in Telangana and Andhra Pradesh, we supply, install and calibrate the JBL Stage 260CDT across Andhra Pradesh and Telangana from our Hyderabad and Vijayawada teams — including Guntur, Eluru, Warangal and Karimnagar. Our showrooms are only in Hyderabad and Vijayawada; other cities start with a remote review of drawings and photos, followed by delivery and installation visits.
JBL Stage 260CDT Installation coverage by city
City
State
Served from
Coverage
Hyderabad
Telangana
Hyderabad team
Showroom, demo room and local team
Vijayawada
Andhra Pradesh
Vijayawada team
Showroom, demo room and local team
Guntur
Andhra Pradesh
Vijayawada team
Regular site visits from the Vijayawada team
Eluru
Andhra Pradesh
Vijayawada team
Regular site visits from the Vijayawada team
Warangal
Telangana
Hyderabad team
Remote drawing review first; site visits scheduled per project
Karimnagar
Telangana
Hyderabad team
Remote drawing review first; site visits scheduled per project
Nizamabad
Telangana
Hyderabad team
Remote drawing review first; site visits scheduled per project
Khammam
Telangana
Hyderabad team
Remote drawing review first; site visits scheduled per project
Mahabubnagar
Telangana
Hyderabad team
Remote drawing review first; site visits scheduled per project
Siddipet
Telangana
Hyderabad team
Remote drawing review first; site visits scheduled per project
Visakhapatnam
Andhra Pradesh
Vijayawada team
Remote drawing review first; site visits scheduled per project
Rajahmundry
Andhra Pradesh
Vijayawada team
Remote drawing review first; site visits scheduled per project
Kakinada
Andhra Pradesh
Vijayawada team
Remote drawing review first; site visits scheduled per project
Vizianagaram
Andhra Pradesh
Vijayawada team
Remote drawing review first; site visits scheduled per project
Ongole
Andhra Pradesh
Vijayawada team
Remote drawing review first; site visits scheduled per project
Nellore
Andhra Pradesh
Vijayawada team
Remote drawing review first; site visits scheduled per project
Tirupati
Andhra Pradesh
Vijayawada team
Remote drawing review first; site visits scheduled per project
Kurnool
Andhra Pradesh
Hyderabad team
Remote drawing review first; site visits scheduled per project
Nandyal
Andhra Pradesh
Hyderabad team
Remote drawing review first; site visits scheduled per project
Kadapa
Andhra Pradesh
Vijayawada team
Remote drawing review first; site visits scheduled per project
Anantapur
Andhra Pradesh
Hyderabad team
Remote drawing review first; site visits scheduled per project
Book a free demo at the LiveInSmart Hyderabad Experience Centre — listen to Dolby Atmos, see 4K laser projectors and walk through live home-automation scenes before you buy.
Pancom Business Centre, Mumbai Hwy, Nagarjuna Nagar Colony, Ameerpet, Hyderabad 500073
It is a dual voice-coil stereo in-ceiling loudspeaker from the JBL Stage Architectural range, supplied individually. A single 6.5-inch in-ceiling speaker with a dual voice-coil woofer and twin ¾-inch tweeters, so one speaker can play both stereo channels — for bathrooms-adjacent passages, kitchens, balconies and small rooms where two speakers will not fit.
What are the key specifications of the JBL Stage 260CDT?+
Woofer: Dual voice-coil 6.5-inch (165 mm) polycellulose cone; Tweeters: Dual ¾-inch (20 mm) aluminium dome with acoustic lens; Recommended amplifier power: 20–75 W RMS; Frequency response (−6 dB on-axis): 50 Hz – 25 kHz; Sensitivity (2.83 V @ 1 m): 90 dB; Nominal impedance: 8 ohms.
What amplifier or AV receiver suits the Stage 260CDT?+
Each Atmos height speaker needs its own amplified channel; background-music zones can use a stereo amplifier. With 90 dB sensitivity, it is easy to drive.
Does the Stage 260CDT need a separate subwoofer?+
Yes, for films we recommend one. It handles the deepest bass and the LFE channel.
Does LiveInSmart install the JBL Stage 260CDT?+
Yes. As an authorised JBL channel partner in Telangana and Andhra Pradesh, we supply, install and calibrate it across Andhra Pradesh and Telangana from our Hyderabad and Vijayawada teams.
How can I check availability and the current best offer for the Stage 260CDT?+
We don't publish prices. Message us on WhatsApp or use the contact form and we'll confirm availability and share the current best offer, including installation options.
What after-sales support is available?+
48-hour response, troubleshooting, recalibration, manufacturer warranty coordination and upgrade advice from the team that installed the system.
Plan a System Around the Stage 260CDT For Your Room?
Share your room size, seating and ceiling type. We'll recommend the speaker layout and receiver, and send the current best offer.