Macro photograph of a COB flip-chip fine-pitch LED video wall panel surface
    Technology · COB / Flip-Chip

    COB LED Video Wall

    COB (chip-on-board) LED packages the diodes directly onto the PCB and seals them under a flat resin layer, instead of mounting individually packaged SMD lamps. That single change is why COB walls survive touch, trolleys, cleaning cloths and sub-P1.0 pixel pitches that SMD struggles with.

    COB fine-pitch LED video wall installed in a high-traffic corporate lobby
    High-traffic lobby wall — COB's sealed surface tolerates contact and daily cleaning.

    Quick answer

    A COB LED video wall uses chip-on-board flip-chip packaging with a sealed resin surface, making it impact-resistant, wipe-cleanable, moisture-resistant and viable down to P0.6–P0.9. It costs roughly 20–40% more than an equivalent SMD wall and is the right choice for high-traffic, touchable or sub-P1.2 installations; SMD remains the value choice at P1.5 and coarser in protected areas.

    COB vs SMD — the Engineering Difference

    SMD mounts a pre-packaged three-in-one lamp on the board; each lamp stands proud and can be knocked off. COB bonds bare dies to the board and floods the surface with resin, so there is nothing to shear off. The trade-offs are practical, not marketing.

    COB vs SMD LED video wall — practical comparison
    CriterionCOB (chip-on-board)SMD (surface-mount)
    Surface durabilitySealed resin — impact, touch and cleaning tolerantExposed lamps — vulnerable to knocks
    Practical pitch floorP0.6–P0.9 routinelyBelow P1.0 becomes fragile and costly
    Moisture / dustEffectively sealed front faceIngress possible between lamps
    ContrastHigher — matte flat surface, less reflectionGood with black-lamp SMD, more surface reflection
    Thermal behaviourBetter heat spread, lower junction temperatureHeat concentrated at each package
    RepairModule-level replacementSingle-lamp repair possible
    Cost~20–40% premiumValue option at P1.5 and coarser

    Where We Specify COB Instead of SMD

    COB is not automatically better — it is better in defined conditions. These are the situations where we recommend paying the premium.

    • Any wall people can reach: lobbies, showrooms, museums, airports, school corridors, exhibition stands
    • Pixel pitch below P1.2 — broadcast studios, virtual production, premium control rooms
    • Rooms cleaned daily, or coastal / high-humidity sites such as Visakhapatnam
    • Camera-facing walls needing high contrast and low surface reflection
    • 24×7 control rooms where lower junction temperature extends module life

    COB Pricing and Lead Time in India (2026)

    Working ranges for turnkey supply and installation of tier-1 India-warranty COB product, including controller, structure, cabling, calibration and commissioning. COB stock is more often import-scheduled than SMD, so plan 4–8 weeks lead time on fine pitches.

    Indicative COB LED video wall turnkey ranges
    PitchTypical useIndicative per sq.m (turnkey)
    P0.9 COBBroadcast, virtual production, premium NOC₹2,20,000–3,20,000
    P1.2 COBBoardroom, luxury showroom, control room₹1,55,000–2,30,000
    P1.5 COBLobby, high-traffic reception, retail₹1,20,000–1,75,000
    P1.8–P2.5 COBCorridors, education, touch-prone areas₹85,000–1,35,000

    Who Engineered This Page — Experience, Expertise & Accountability

    LiveInSmart Technologies is a commercial-AV and LED display system integrator, not a box reseller. Our own engineers run the site survey, structural and thermal calculation, pixel-pitch sizing, cabinet installation, receiving-card mapping, colour calibration and the AMC that follows. The guidance on this page is written from installations we commissioned and maintain across Telangana and Andhra Pradesh — indoor fine-pitch boardroom walls, high-brightness outdoor façades, 24×7 control rooms, auditorium stages and retail signage.

    • In-house AV engineering team — survey, structural drawings, load, thermal and power calculations
    • Certified installation crew: laser-levelled cabinet alignment, NovaStar / Colorlight commissioning, Delta-E colour calibration
    • Genuine India-warranty cabinets with GST invoice, 3-year LiveInSmart installation warranty and structured AMC
    • Brand-agnostic specification across Unilumin, Absen, Hikvision, Samsung, Maxhub and Aaztec — chosen against your budget and redundancy needs, not a sales target
    • Two experience centres — Hyderabad (Ameerpet) and Vijayawada — with live LED walls you can audition before you buy

    Get a Costed Design From an LED Engineer

    Send us the space dimensions, closest viewing distance, ambient light level and the content you will run (dashboards, video, live camera, signage). Within two working days you get a designed configuration — pixel pitch, cabinet layout, controller, power and redundancy — with a line-item BOQ for a COB LED video wall, not a one-line price.

    Experience Centre · Hyderabad

    Visit our Hyderabad showroom

    Book a free demo at the LiveInSmart Hyderabad Experience Centre — listen to Dolby Atmos, see 4K laser projectors and walk through live home-automation scenes before you buy.

    Pancom Business Centre, Mumbai Hwy, Nagarjuna Nagar Colony, Ameerpet, Hyderabad 500073

    Frequently Asked Questions

    Is a COB LED video wall worth the extra cost?+

    Yes when the wall is touchable, cleaned often, sits in humid or coastal air, or is finer than P1.2. In a protected boardroom at P1.5 or coarser, a good black-lamp SMD wall delivers a very similar image for materially less money.

    Is COB the same as micro LED?+

    No. COB is a packaging method; micro LED refers to the chip size. Most sub-P1.0 walls sold today are COB-packaged mini-LED chips. True micro LED at commercial scale remains a niche, high-cost category.

    Can a COB LED wall be cleaned?+

    Yes — that is one of its main advantages. The flat resin face can be wiped with a soft dry or slightly damp cloth. We still recommend a documented cleaning procedure in the AMC so the crew never uses solvents on the surface.

    How is a COB wall repaired if a pixel fails?+

    COB is repaired at module level, not lamp level: the faulty module is unclipped from the front and hot-swapped from spares held under AMC. We hold spare modules for every wall we maintain so a fault is corrected in minutes, not weeks.